Welcome to PakSearch.com Pakistan's Premier Business Information Service


For business information, annual reports, laws, ordinances, regulations and articles.






Google
 
Web Paksearch.com

GOVERNMENT OF PAKISTAN
REVENUE DIVISION
CENTRAL BOARD OF REVENUE

Islamabad, the 22nd March, 1999.

NOTIFICATION

(CUSTOMS)

S.R.O.174(I)/99.- In exercise of the powers conferred by clause (c) of section 21 of the Customs Act, 1969 (IV of 1969), the Central Board of Revenue is pleased to authorize repayment of customs-duties to the extent specified in column (3) of the Schedules below paid on the importation of the raw materials specified in column (1) of those Schedules and used in the production or manufacture of the goods specified in column (2) thereof, subject to the following conditions, namely:-

(i) The manufactured goods are exported out of Pakistan and an application for repayment of customs-duties is presented to the proper officer of Customs within two hundred and ten days of such exportation or within one hundred and eighty days from the date of realization of foreign exchange as shown on Bank Credit Advice issued in accordance with the current directive of the State Bank of Pakistan; and

(ii) the exporter makes a declaration on the face of the original shipping bill and on other export documents to the effect that he would claim repayment of the customs-duties paid on the imported raw materials used in the production or manufacture of the goods being exported.

2. The repayment of customs-duties authorized by this notification shall be admissible in respect of the goods exported on or after the 1st April, 1999.

S C H E D U L E - I

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Carbon steel.
2. Twist brills.
3. Electroplating polishes and comparatione.
4. Emery grain.
5. Emery flour.
6. Nickle anode.
7. Felt mop.		 1. Hand tools of carbon steel, nickle or chrome plated, all sorts. 9.20% of the f.o.b.value.
1. Stainless steel.
2. Twist brills.
3. Electroplating polishes and comparition.
4. Emery flour.
5. grain.
6. Felt mop.		 2. Hand tools of stainless steel, all sorts. 5.40% of the f.o.b. value.

[F.No. 3(61)SS(CR)/77]

S C H E D U L E - II

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Carbon steel.
2. Trichloro- ethylene.		 1. Shaving blades made of carbon steel. 2.60% of the f.o.b. value.
3. Titanine thinner.
4. Cellophane rolls.
5. Cellophane sheets.		    
1. Stainless steel.
2. Trichloro- ethylene.
3. Titanine thinner.
4. Cellophane rolls.
5. Cellophane sheets.		 2. Shaving blades made of stainless steel. 8.50% of the f.o.b. value.

[F.No. 3(130)SS(CR)/71]

S C H E D U L E - III

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Syrex SD-7 brand synthetic diaphragms.
2. Side over post gasket.
3. Copper casing O'ring.
4. Index packing.
5. Flag rod packing.
6. Simirit O'rings.
7. CKD kit.
8. Index boxes.
9. ATG nipples.
10. Bodies.
11. Front casing.
12. Rear casing.
13. Top covers.		 Complete gas meters. Rs.230.29 per piece.

[F.NO. 3(54)SS(CR)/81]

S C H E D U L E - IV

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Electrical steel sheets.
2. M.S. sheets.
3. Aluminium ingots.
4. Aluminium sheets.
5. Ball bearing (fans).
6. Insulating material (plastic moulding compound):-
(i) acetal copolymer for contact plate, rod, bridge, gear and lock; and
(ii) polyproplene for knobs, isolating, etc.
7. Condenser (capacitor).
8. M.S. bright (Blanks) shafting.
9. C.R.C. sheets 24" gauge. 		Ceiling, pedestal, cabin and exhaust fans of all sizes including such fans in CKD condition. 7.16% of the f.o.b. value.

[F.No. 3(99)SS(CR)/89]

S C H E D U L E - V

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
Alloy steel wire rod. Steel nuts, screws and bolts of all types. 8.25% of the f.o.b. value.

[F.No. 3(6)SS(CR)/89]

S C H E D U L E - VI

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Aluminium ingot.
2. Langsol.		 Aluminium utensils. Rs.6.20 per kilogram.

[F.No. 3(111)SS(CR)/74]

S C H E D U L E - VII

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.

(1)

(2)

(3)
Cold rolled steel strips in coils. 1. Light cut hand shoe tacks (all sizes). 11.22% of the f.o.b. value.
Iron and steel wire. 2. Wire nails (all sizes). 7.70% of the f.o.b. value.
Iron or steel wire or bright hard drawn nail wire. 3. Machine tacks (all sizes). 7.70% of the f.o.b. value.
Iron or steel wire or bright hard drawn nail wire. 4. Bifurcated rivet. 7.70% of the f.o.b. value.

[F.No. 3(72)SS(CR)/75]

S C H E D U L E - VIII

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Fillister head screws.
2. Pan head screws.
3. Oval head screws.
4. Button head screws.
5. Counter sink screws.
6. Flat head screws.
7. Shoulder screws.
8. Special screw ML6.
9. Self tapping screws.
10. Special oval head screws.
11. Eccentric screws.
12. Set screws.
13. Special screw pins.
14. Shoulder screw pin.
15. Hexagonal nuts.
16. Nuts.
17. Horse screw locks.
18. Bushes.
19. Sockets.
20. Tension springs.
21. Torsion springs.
22. Half round screws.
23. Spring washers.
24. Stop rubber.
25. Ball 6.35 & DIN-5401.?
26. Lock washer.
27. Typebar axle.
28. Sound dead.
29. Eccentric screw.
30. Space arch axle.
31. Shift key button.
32. Key buttons.
33. Axle.
34. Rubber tube.
35. Carriage lock spring.
36. Eccentric washer.
37. Platen axle.
38. Ball Cage.
39. Paper release lever shaft.
40. Washer.
41. Paper release lever shaft.
42. Roll.
43. Margin stop spring.
44. Feed roller (rear).
45. Feed roller (front).
46. Platen rubber sleeve.
47. Platen lever.
48. Right hange.
49. Left flange.
50. Feet restage.
51. Strap clamp left.
52. Strap clamp right.
53. Roller spring.
54. Bush rubber.
55. Line space lever axle.
56. Plating spring.
57. Discs.
58. Type head pica.
59. Tabulator button.
60. Platen knob core.
61. Ribbon spools.
62. Links left.
63. St2 LG CBK DIN.
64. St2 DIN 1544.
65. 1-0, 04x30 DIN 1544.
66. 1-27.5, 04x30 DIN 1544.
67. 1x36.5, 04X30 DIN 1544.
68. ST2LC GBK DIN 1544.
69. St 2LG DIN 1544.
70. ST3 K50-GBK DIN 1544.
71. ST4 LG GBK DIN 1544.
72. G 75 DIN 1544.
73. C 75 G DIN 1544.
74. 0.75 N+A DIN 1544.
75. TU St 1-GBK 1544.
76. 16Mn Cr 5C 1544.
77. 16 Mn Cr 5 G DIN 1544 2.5x8.
78. Steel wire DIN 2706 1.50 mm.
79. Steel roll M 75 1+0.015x65.
80. C15 profile G15R 5239.
81. G 15K orofile 3x4.
82. Alloy steel 15 Cr V3 1.50mm & 20mm.
83. Profile PVC block 20 mtr.
84. Pantandur black 0.5x85.
85. Poliacetal detrin DE 8010.
86. Poliacide bayer 30 S.
87. Vestyron 62031.
88. Cellidor (CCB) bayer.		 Portable type- writers. 12.65% of the f.o.b. value.

[F.No. 3(41)SS(CR)/78]

S C H E D U L E - IX

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Electrical steel.
2. M.S. sheets. KVA.
3. Copper wire.
4. Presspans.
5. Resin.
6. Copper strips.
7. Proceline bushing.
8. Brass rods.		 Transformers of 25 KVA to 1500 9.90% of the f.o.b. value.

[F.No. 3(10)SS(CR)/75]

S C H E D U L E - X

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Steel sheets.
2. Copper rods.
3. Hex rods.
4. Arc control pots.
5. Circuit breaker bushing.
6. Permali tension rods.		 Switch gears, all types. 11.55% of the f.o.b. value.

[F.No. 3(10)SS(CR)/75]

S C H E D U L E - XI

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
  Spare parts of Bicycle, namely:  
1. Steel wire.
2. Steel Sheets.
3. Steel tubes.
4. Steel rod.		 Brake-set assembly, complete, brake-set front and rear assemly, spanner, spoke with nipple and washers, brake-shoe assembly, brake-clip, brake-button with nut, brake-book assembly, brake-rod, hub axle front and rear assembly and parts thereof, cotter-pin with nut, seat-pin, seat-clip assembly, bell-crank, chain adjuster with nut, plunger-rod, lamp bracket, hub assembly and parts thereof rear and front, mud-guard, handle assembly and parts thereof, mud-guards rear and front, different size, free wheel, rim front and rear, different size, frame body size 24", 22" 20", 16", complete seat assembly, paddle assembly, paddle axle and paddle nuts, front forks sizes 24", 22", 16", B.B. Axle, B.B. Cups, chain wheel and crank sets size 48T, 46T, 36T, pumps, locks, cycle bells, cycle tool kits and steel washers. 4.60% of the f.o.b. value.

[F.No. 3(182)Rebate/97]

S C H E D U L E - XII

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Ball clay.
2. Chromium oxide		 1. High tension and low tension electrical porcelain insulator and fuse units of all types. Rs.48.08 per 100 kilogram.
1. Ball clay.
2. Chromium oxide.
3. Cap.
4. Socket key.		 2. Disc insulator for transmission and distribution electrical lines. 6.80% of the f.o.b. value.

[F.No. 3(20)SS(CR)/79]

S C H E D U L E - XIII

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Tin.
2. Lead.		 Resin cored non-fluxed solder wires and bars, all sorts. 9% of the f.o.b. value.

[F.No. 3(24)SS(CR)/78]

S C H E D U L E - XIV

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Raw rubber.
2. Calcium carbonate.
3. Zinc oxide.
4. M.B.T.S.
5. Sulphur powder.
6. Stearic acid.
7. Carbon black.		 Rubber radiator hoses and rubber hose pipes. 2.80% of the f.o.b. value.

[F.No. 3(89)SS(CR)/79]

S C H E D U L E - XV

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
Brass scrap. Brass hardware and moulded/machined items including brass wire. Rs.6.11 per kilogram.

[F.No. 3(5)SS(CR)/80]

S C H E D U L E - XVI

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Scrap iron and steel.
2. Copper.
3. Tin.
4. Zinc.
5. Lead.
6. Aluminium.
7. M.S. plates and sheets.
8. Stainless steel bar/tube/pipe.
9. Bushes.
10. Nylon OK 38-1
11. Key.
12. Washer for bobbin disc.
13. Weft catch plate.
14. End cutter.
15. Springs.
16. Brake band.
17. Transferror.
18. Shuttle guard roller (Resine).
19. Ring tample.
20. Leather picking check strap.
21. Spring lock washer.
22. Split pin.
23. Wood picking stick.
24. Rubber buffer.
25. Rubber `V' belt.
26. Grease nipple.
27. Oil cup with spring lid.
28. Push button starting switch.
29. Magnet switch.
30. Steel Strip (chume).
31. OK processed strip.
32. NL-55/46 temple rod.
33. Taper pin.
34. Slide block for regulator.
35. Nylon step.
36. Nylon weft feeler cover.
37. Nylon roller for end cuter.
38. Nylon cam bowl.
39. Resine weft feeler.
40. Vinyl cap for weft feeler.
41. Fibre thrast ring for pully.
42. Fibre for wood side lever.
43. Leather packer.
44. Weft fork for feeler change.
45. Brake lining.
46. Side levers made of laminated wood.		 1. Power loom size,_
(a) 116 cms to 140 cms;
(b) 141 cms to 150 cms;
(c) 151 cms to 160 cms;
(d) 161 cms to 180 cms;
(e) 181 cms to . 191 cms;
(f) 192 cms to 214 cms; and
(g) 215 cms to 331 cms.		 Per unit
Rs.7590/-
Rs.8536/-
Rs.9295/-
Rs.9754/-
Rs.10670/-
Rs.11474/-
Rs.12100/-

[F.No. 3(28)SS(CR)/78]

S C H E D U L E - XVII

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Diamond cutting tools.
2. Polishing materials.		 Handicrafts made of onyx or marble. 3.50% of the f.o.b. value.

[F.No. 3(23)SS(CR)/76.Pt]

S C H E D U L E - XVIII
Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
Brass scrap. 1. Handicrafts and musical instruments fully made of brass. 2.32% of the f.o.b. value.
Copper scrap. 2. Handicrafts and musical instruments fully made of copper. 2.20% of the f.o.b. value.
Aluminium ingots/scrap. 3. Handicrafts and musical instruments fully made of aluminium. 1.50% of the f.o.b. value.

[F.No. 3(7)SS(CR)/79]

S C H E D U L E - XIX

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
Heat resistance wire. Heater element (1000 to 1500 watts). 4.30% of the f.o.b. value.

[F.No. 3(24)SS(CR)/80]

S C H E D U L E - XX

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
Horn beam wood blocks. Textile wooden shuttles (all types). 6% of the f.o.b. value.

[F.No. 3(63)SS(CR)/80]

S C H E D U L E - XXI

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Plastic moulding compound (PMC).
2. Poly vinyl chloride (PVC).
3. Raw rubber.
4. Steel scrap.
5. Metal sheets C.R.C.		 Plastic tricycle, minimum weight 3.6 kilogram each piece Rs.39.92 per piece.

[F.No. 3(29)SS(CR)/81]

S C H E D U L E - XXII

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Movement.
2. Clock hands.
3. Plastic moulding compound.
4. Stamping foil.		 Quartz clocks, all sorts. 7% of the f.o.b. value.

[F.No. 3(40)S(CR)/94]

S C H E D U L E - XXIII

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Stainless steel.
2. Stainless steel screws.
3. Emery powder.
4. Emery grain.
5. Tricholor ethylene.
6. Electrolyte salt.
7. Electroplating polishes.
8. Satin finishing wheel.		 1. Annealed surgical and veterinary instruments of stainless steel and non-surgical scissors of stainless steel, all types. 7.11% of the f.o.b. value.
1. Carbon steel.
2. Carbon steel screws.
3. Emery powder.
4. Emery grain.
5. Nickle salt.
6. Nickle anode.
7. Electroplating polishes.		 2. Annealed surgical and veterinary instruments of carbon steel and non-surgical scissors of carbon steel, all types. 6.34% of the f.o.b. value.
1. Pig iron.
2. Emery powder.
3. Emery grain.
4. Nickle salt.
5. Nickle anode.
6. Electroplating polishes.		 3. Nickel or chrome plated scissors, annealed surgical or non-surgical all types made out of cast iron. 6.34% of the f.o.b. value.
1. Brass sheet.
2. Stainless steel screws.
3. Emery powder.
4. Emery grain.
5. Nickle salt.
6. Nickle anode.
7. Electroplating polishes.		 4. Annealed surgical and veterinary instruments all sorts made of brass. 3.92% of the f.o.b. value.
1. Stainless steel.
2. Stainless steel screws.
3. Emery grain/flour.
4. Electroplating polishes.
5. Tricholor ethylene.
6. Granules and flakes.
7. Grinding belts.
8. Satin finishing wheel.
9. Wire wheel brushes.
10.Electropol.		 5. Annealed surgical and veterinary instruments of stainless steel all sorts made from duty free imported forgings. 6.23% of the f.o.b. value.

[F.No. 3(132)Rebate/97]

S C H E D U L E - XXIV

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Stainless steel.
2. Brass.
3. Nickle silver.
4. Plastic sheet.
5. Luster.
6. Emery grain.
7. Trichloroethylene.
8. Brass wire.
9. Densified wood. wares.		 Stainless steel and carbon steel pocket knives, sportsman knives, hunting knives, (all sorts) stainless steel cutlery and table 7.77% of the f.o.b. value.

[F.No. 3(133)Rebate/97]

S C H E D U L E - XXV

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Aluminium.
2. Paint for sticking.
3. Backolite.
4. Metal powder.		 Non-stick frying pots, all sizes. 10.40% of the f.o.b. value.

[F.No. 3(169)SS(CR)/91]

S C H E D U L E - XXVI
Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
Stainless steel sheets. Stainless steel utensils and kitchen wares of various sizes. Rs.10.20 per kilogram.

[F.No. 3(75)SS(CR)/73]

S C H E D U L E - XXVII

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
Tin plate. 1. Tin container used for packing of 16 kgs vegetable ghee and processed edible oil. Rs.10.16 per container.
  2. Tin container used for packing of 5 kgs vegetable ghee and processed edible oil. Rs.3.95 per container.
  3. Tin container used for packing of 2.5 kgs vegetable ghee and processed edible oil. Rs.2.48 per container.

[F.No. 3(17)S(CR)/93]

S C H E D U L E - XXVIII
Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Tin plates electrolytic.
2. Tin plate waste, sizes 20"x28" and larger.		 Tin containers (all sizes). 10.91% of the f.o.b. value.

[F.No. 3(80)S(CR)/80]

S C H E D U L E - XXIX
Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Steel wire.
2. Nylon thread.
3. Scotech tape.
4. Levelling agent.
5. Acetic acid.
6. Dyes.		 Plumages/hackles. 0.55% of the f.o.b. value.

[F.No. 3(10)SS(CR)/81]

S C H E D U L E - XXX
Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Brass strip 0.20mmx8mm.
2. Brass Kar/rod/profile/ingot.
3. Sodium cyanide granular.
4. Nickle pellets.
5. Nickle sulphate.
6. Nickle chloride.
7. Boric acid.
8. Initial brightener photine CBUS/38.
9. Brightener ZN-1574.
10. Wetting agent ZN-1572.
11. Sulphuric acid extra pure.
12. Chromic acid.
13. Chromic salt additive mach-11.
14. Activax cleaner.		 Chromium plated brass flexible tube of all sizes. Re.0.11 per centimeter.

[F.No. 3(164)S(CR)/92]

S C H E D U L E - XXXI
Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Electrical steel sheet.
2. Enamelled copper wire.
3. Heat resistant cable.
4. Phasoflex.
5. Trivolton H.
6. Resin coated glass sleeve.
7. Fan key.
8. Sleeve key.
9. As key.
10. Ball bearing.
11. Shaft steel.
12. Hot rolled carbon steel.
13. Pyrometer element.
14. Hot rolled round.
15. Rotor key.
16. Distance ring key.		 Electric motors (all sizes). 6.29% of the f.o.b. value.


[F.No. 3(29)SS(CR)/77]

S C H E D U L E - XXXII

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. 2020 Needles.
2. 591 S.B. CTR screw.
3. 15278 SBCT spring.
4. 2518 Bobbin.
5. 15338-002 S.R. slide complete 154866/45321.
6. P. Foot.
7. 000071/S Shuttle driver.
8. 503030 F.L.S.S. driver.
9. 546268-902 T.T.U.S.P. Collar.
10. 547152 T.T.U.S.P. Guard.
11. 549857-701 T. Indicator.
12. 549854-701 T. Indicator flange.
13. Steel bar of various sizes of 43.4mm.
14. Steel strips.		 1. Domestic sewing machine complete or in CKD condition. Rs.46.60 per piece.
1. 581-806 Shettle bobbin case.
2. Tension regulating screw.
3. 15278 SBCT spring.
4. 2518 Shuttle bobbin.
5. 155338 Shuttle race slide comp.
6. 154849 Asc. slide block.
7. 319713 Control panel.
8. 000071/S shuttle driver.
9. 540958 As spiral gear.
10. 540967 BACL. FG Holder.
11. 540977 Feed dog.
12. 540980 NBV Bracket.
13. 540982 N.B. Cam. stud.
14. 540985 BBDA Slide.
15. 540988 NBVC. GP plate.
16. 540988 NBPLEG. Holder.
17. 540994 NBVC. Gear complete.
18. 541001 Presser foot complete.
19. 546268-902 (546389) I.T.S.P. Collar.
20. 546960 Trade mark complete.
21. 547152 TTST Guard.
22. 549857-616 Tension indicator.
23. 549858-616 T. Ind. flange.
24. 15 I Needle.
25. 161307 Needle threader.
26. 16171 Hammer foot.
27. Steel bar.
28. Steel strip.
29. Pig iron.
30. Shuttle hook.
31. Face plate with arm side cover.
32. Bobbin winder complete.
33. Oscillating rock shaft.		 2. Zig zag type domestic sewing machine, complete or in CKD condition. Rs.127.70 per piece.
1. Steel bar, size 6 mm/15/64" for B. C.R.H.S. and connecting red.
2. Steel bar, size 16 mm/5/8" for connecting red hinge.
3. Steel bar, size 11 mm/11.2 mm for band wheel shaft.
4. Steel bar, size 12.7 mm/1/2" for connecting red hinge stud.
5. Steel bar, size 9.5/9.6 mm for connecting red nut.
6. Pig iron (C.I.parts) -
(i) Exp-01 band wheel.
(ii) Exp-02 tradle.
(iii) Exp-03 trade support.
(iv) Expor-163L left leg.
(v) Exp-163R right leg.
(vi) Exp-164 brace.
(vii) 25068 leg roller.		 3. Sewing machine stands and stand parts. Rs.14.81 per piece.
1. Steel strips.
2. Steel bars.		 4. Hand attachment part for domestic sewing machine. Re.0.35 per piece.

[F.No. 3(17)SS(CR)/77]

S C H E D U L E - XXXIII

Raw materials imported. Goods produced or manufactured. Extent of repayment of customs-duties.
(1) (2) (3)
1. Aluminium.
2. Backalite.
3. Lead.
4. Paint interior.
5. Paint exterior.
6. Metal powder polish.		 1. Non-stick karahi, all sizes. 13% of the f.o.b. value.
1. Aluminium.
2. Backalite.
3. Lead.
4. Paint interior.
5. Paint exterior.
6. Metal powder polish.
7. Brass.		 2. Non-stick sauce pan all sizes. 14.90% of the f.o.b. value.
1. Aluminium.
2. Backalite.
3. Lead. all sizes.
4. Paint interior.
5. Metal powder polish.
6. Stainless steel.		 3. Non-stick sauce pan 15% of the f.o.b. value.
1. Aluminium.
2. Backalite.
3. Lead.
4. Sulphuric acid.
5. Phosphoric acid.
6. Nitric acid.
7. Metal powder polish.
8. Luster.
9. Brightener.
10. Paint interior.		 4. Non-stick gas tanoor. 12.80% of the f.o.b. value.
1. Aluminium.
2. Rubber.
3. Brass. all sizes.
4. Backalite.
5. Luster.
6. Metal powder polish.
7. Nitric acid.
8. Phosphoric acid.
9. Sulphuric acid.
10. Brightener.
11. Stainless steel.
12. Lead.		 5. Alloy metal pressure cooker, 13.80% of the f.o.b. value.
1. Aluminium.
2. Backalite.
3. Lead. sizes.
4. Paint interior.
5. Paint exterior.
6. Metal powder polish.
7. Brass.
8. Stainless steel.		 6. Non-stick fry pan, all 11% of the f.o.b. value.
1. Aluminium.
2. Backalite.
3. Sulphuric acid.
4. Phosphoric acid.
5. Nitric acid.
6. Metal powder polish.
7. Luster.
8. Brightener.
9. Lead.		 7. Alloy metal cooking pan, all sizes. 13.80% of the f.o.b. value.

[F.No. 3(55)SS(CR)/84]

(Muhammad Wali Khan)
Chief (Duty Drawback System)
Google
 
Web Paksearch.com




Home | About Us | Contact | Information Resources